Page 81 - GRIHA Manual Volume V - Introduction to National Rating System
P. 81
74 Griha Manual: Volume 5
16.2 Compliance
the following documents are to be submitted.
16.2.1 Cut sheets, specification sheets, and bill of quantity demonstrating the percentage
reduction in embodied energy with the use of low-energy materials/eicient
technologies.
16.2.2 document to demonstrate the use of aforesaid technologies/materials in the relevant
floor plans, with clear dimensions and enlisting of specifications.
16.2.3 narrative showing how the selected technology/material has amounted to reduction in
high-energy materials or regional availability when compared with equivalent products
for the same application. on-site photographs and construction project management
plan, which would clearly demonstrate the use/construction/specifications of low-
energy technologies.
16.3 Appraisal (maximum-4 points)
16.3.1 Structural application
Use of low-energy materials/eicient technologies in structural application clearly
demonstrating a minimum 5% reduction in the embodied energy, when compared
with equivalent products for the same application, for 100% structural system used in a
building, meeting the equivalent strength requirements, as per all compliance clauses
(2 points).
16.3.2 non-structural application
Use of low-energy materials/eicient technologies (not based on the utilization of
industrial waste), which are used for non-structural applications, such as infill wall
system and cause a minimum 5% reduction in the embodied energy, when compared
with equivalent products for the same application, for 100% infill wall system used in
a building, meeting the equivalent strength requirements, as per all the compliance
clauses (2 points).
Evaluation Procedure
Appraisal 16.3.1 and 16.3.2
Structural application
Use of low-energy materials/eicient technologies in structural application clearly demonstrating
a minimum of 5% reduction in the embodied energy, when compared with equivalent products
for the same application, for 100% structural system used in a building, meeting the equivalent
strength requirements, as per all compliance clauses (2 points).
non-structural application
Use of low-energy materials/eicient technologies (not based on the utilization of industrial waste),
which are used for non-structural applications, such as infill wall system, and cause a minimum
of 5% reduction in the embodied energy, when compared with equivalent products for the
same application, for 100% infill wall system used in a building, meeting the equivalent strength
requirements, as per all the compliance clauses (2 points).
16.2 Compliance
the following documents are to be submitted.
16.2.1 Cut sheets, specification sheets, and bill of quantity demonstrating the percentage
reduction in embodied energy with the use of low-energy materials/eicient
technologies.
16.2.2 document to demonstrate the use of aforesaid technologies/materials in the relevant
floor plans, with clear dimensions and enlisting of specifications.
16.2.3 narrative showing how the selected technology/material has amounted to reduction in
high-energy materials or regional availability when compared with equivalent products
for the same application. on-site photographs and construction project management
plan, which would clearly demonstrate the use/construction/specifications of low-
energy technologies.
16.3 Appraisal (maximum-4 points)
16.3.1 Structural application
Use of low-energy materials/eicient technologies in structural application clearly
demonstrating a minimum 5% reduction in the embodied energy, when compared
with equivalent products for the same application, for 100% structural system used in a
building, meeting the equivalent strength requirements, as per all compliance clauses
(2 points).
16.3.2 non-structural application
Use of low-energy materials/eicient technologies (not based on the utilization of
industrial waste), which are used for non-structural applications, such as infill wall
system and cause a minimum 5% reduction in the embodied energy, when compared
with equivalent products for the same application, for 100% infill wall system used in
a building, meeting the equivalent strength requirements, as per all the compliance
clauses (2 points).
Evaluation Procedure
Appraisal 16.3.1 and 16.3.2
Structural application
Use of low-energy materials/eicient technologies in structural application clearly demonstrating
a minimum of 5% reduction in the embodied energy, when compared with equivalent products
for the same application, for 100% structural system used in a building, meeting the equivalent
strength requirements, as per all compliance clauses (2 points).
non-structural application
Use of low-energy materials/eicient technologies (not based on the utilization of industrial waste),
which are used for non-structural applications, such as infill wall system, and cause a minimum
of 5% reduction in the embodied energy, when compared with equivalent products for the
same application, for 100% infill wall system used in a building, meeting the equivalent strength
requirements, as per all the compliance clauses (2 points).
